content top
Service Line Locations

Service Line Locations

Suggestions for service lines from the meter to your residence.

  1. Service line should be at least 30 inches deep.  The first six inches of cover should be rock free.
  2. Minimum 3/4 inch inside diameter service line shall be used with minimum of 200 PSI pressure rating
  3. A cut off valve shall be installed for your service line in case of a leak, or for any other reason.  The valve should be located between the meter and the first point of usage.  For no reason should the customer turn the water off or on at the meter.  If you detect a problem with your meter, you should contact our office.
  4. The customer must install a pressure surge tank near the hot water heater in case of expansion due to the hot water tank being set to hot.


Comments are closed.